MIPA Rostversiegelung Rust Sealer 100ml

MIPA Rostversiegelung Rust Sealer 100ml Can be applied by brush without dilution or spray gun, by adding 5 - 10 % synthetic thinner. Before application, lose parts rust, oil, grease and dirt as well as corrosive old layers of paint have to be removed. Recoatable after 30 - 60 minutes (20 °C). DO NOT WASH the surface, which is covered with corrosion sealer. Spreading rate: 15,0 - 20,0 sqm/l. Colour Colourless Spray Viscosity Ready for use; thin if necessary Application method Brush or Gravity Spray Gun Flash-off time 5 - 8 min between coats Drying time 20 °C 10 - 15 min VOC Regulation: EU limit value for this product (category B/e): 840 g/l This product contains max. 756 g/l of VOC. Processing instructions: Apply Mipa Rostversiegelung by brush on the substrate. Before applying remove loose rust, oil, grease and dirt as well as underfilm corrosion. Mipa Rostveriegelung reacts with moisture. Close the can immediately after use. Smaller quantities should be first taken out of the can and then be applied.