MIPA Protector Black Tough Bed Liner KIT 4L+H10 HARDENER+UNDERBODY SPRAY GUN

Highly resistant 2K polyurethane-acrylic paint for a scratch-resistant and robust black coating of truck bed surfaces (e.g. Pick-Up truck beds) and of all heavy duty surfaces on commercial vehicles, off-road vehicles, camping cars, trailers and SUVs etc. Beside its very high wear resistance Mipa Protector provides also an excellent mechanical and chemical resistance. The very high vertical stability allows applying extremely high-build coatings. Easy to use since 750 ml paint material is already filled in 1 litre cans for underbody sealants. Just add 250 ml of the hardener Mipa 2K-Härter H 5 or H 10. Shake than the can vigorously and apply the mixture using an underbody sealant spray gun. Possible application areas • Bodies of SUVs and off-road vehicles - rims of SUVs and off-road vehicles • Floors and storage areas in caravans - underbodies and chassis • Bull bars, running boards, roof racks, spare wheel covers and so on - fender well • Access ramps, decks of recovery vehicles and trailers Features • High UV and weathering resistance • Excellent shock and scratch resistance • High resistance to fuels and oils • Excellent water resistance • Provides noise reduction • Short-term temperature exposure: 180 °C - permanent temperature exposure: 150 °C Mixing ratio • 3 parts Protector - 1 parts Mipa 2K-Härter H 5 / H 10 • Hardener for complete paintwork - Mipa 2K-Härter H 10 • Hardener for partial paintwork - Mipa 2K-Härter H 5 How to use Mixing procedure for applications with underbody sealant spray gun (UBS) • Shake vigorously Mipa Protector paint material. • Open the can, add 250 ml of hardener, close the lid and shake vigorously for approx. 2 minutes. Mixing procedure for applications with gravity spray guns • Shake vigorously Mipa Protector paint material. • Pour the paint in a mixing cup, add the hardener in a mixing ratio of 3 : 1 by volume and mix thoroughly. • Add the thinner and mix thoroughly.