Mipa Guide Coat Aerosol – 400ML Black Spray for Bodywork Perfection

MIPA GUIDE COAT AEROSOL 400ML Black guide coat to make sanding imperfections visible (i.e. low and uneven areas) on primer and filler surfaces. Colour: Matt Black Intended use Mipa Kontroll-Spray schwarz is a black guide coat that is used to make irregularities visible when sanding putty and filler surfaces. It reveals any imperfections in the surface, as it blackens the remaining slow spots during flatting that have been caused by irregularities or pitting. Once the entire guide coat has been removed, you can be assured that the remaining filler or putty surface is smooth, absolutely flat and free from imperfections. Processing instructions Substrates Putty and filler surfaces Pre-treatment / cleansing Pre-clean with Mipa Silikonentferner. Please refer to the section "Substrate preparation" for detailed information. Characteristics Fast drying Effective product for detecting unevenness on putty and filler surfaces Very easy to sand Colour / Gloss level black / matt Preparation Before use, shake can vigorously for 1 - 2 minutes! Application Spray to test - Spray distance approx. 20 - 30 cm Apply 1 thin, even, not opaque coat! Flash-off time - After use After use, turn can upside down and spray until the valve is clean, this prevents the valve from clogging up. Mipa Kontroll-Spray Item no. 21210 0000