FMT3003 Breathing Regulator – Includes 0.5µ, Carbon & Coalescing 3Filters

FAST MOVER TOOLS, 3-STAGE BREATHING AIR FILTER REGULATOR UNIT FMT3003 With air filtration down to 0.01 microns and activated carbon removing contaminants down to 0.003 ppm for both breathing and spraying. It is designed to remove dirt, liquid, oil and water from flowing compressed air. Filters should be replaced every 3 months. Supplied with brackets. Air Inlet: 1/2″ (1/4″ adapter supplied) Air Outlet: 1/4″ Gauge Range: 0-11 Bar (0-160 PSI) Width: 230mm, Height: 238mm, Weight: 3250g Maximum Air Flow: 25CFM Air Supply Pressure: 18 Bar Regulated Air Pressure: 0-12 Bar Maximum Operating Temperature: 50°C (not suitable for low bake booths/ovens) First Filtration: 0.01 Micron Second Filtration: Coalescing Filter Final Filtration: Activated Carbon 0.003 ppm (odour removal) Drain: Semi-Automatic Replacement Activated Carbon Filter For FMT3003 Activated carbon for the third stage on FMT3003. Filters should be replaced every 3 months or when odours can be smelt in the head top unit.Suggested replacement frequency is every 3 months. If there is a noticeable restriction in airflow or odours can be smelt when wearing the head top, then the filter should be replaced immediately. Failure to replace with genuine parts will invalidate product compliance. Replacement Coalescing Breathing Air Filter For FMT3003 Second stage filter and will filter the air down to 0.001micron. Removes water vapour and oil droplets in the air. Suggested replacement frequency is every 3 months. If there is a noticeable restriction in airflow or odours can be smelt when wearing the head top, then the filter should be replaced immediately. Failure to replace with genuine parts will invalidate product compliance. Replacement 0.5Micron Breathing Air Filter For FMT3003 First stage filter and will filter the incoming air down to 0.5 Microns, filtering most dust particulates and solids. Suggested replacement frequency is every 3 months. If there is a noticeable restriction in airflow or odours can be smelt when wearing the head top, then the filter should be replaced immediately. Failure to replace with genuine parts will invalidate product compliance.