MIPA P60 S 2K Polyester Spray Filler Grey 1L X2 Kit With Hardener + Gloves

2x MIPA P60 S 2K Polyester Spray Filler Grey 1L Kit With Hardener – Car Body RepairPROFESSIONAL 2K POLYESTER SPRAY FILLER | HIGH BUILD | GREY | 2 × 1L KITS | HARDENER INCLUDEDPRODUCT DESCRIPTIONMIPA P60 S is a professional-quality 2K polyester spray filler designed for automotive body repairs, surface levelling and vehicle refinishing.Its high-build polyester formulation provides excellent filling properties, making it ideal for repairing uneven surfaces, deep sanding marks and rough preliminary bodywork.This twin-pack includes 2 × MIPA P60 S Grey 1L Spray Filler Kits with Hardener, providing a total of 2 litres of spray filler, plus the supplied hardener.Suitable for professional bodyshops, car repair workshops and vehicle restoration projects, MIPA P60 S creates a sandable surface ready for further preparation and compatible primer systems.KEY FEATURES & BENEFITSProfessional 2K polyester spray fillerHigh-build formula with excellent filling propertiesIdeal for automotive bodywork and car panel repairsHelps level deep sanding marks and surface imperfectionsSuitable for rough preliminary repair workGrey colourPolyester resin formulationDesigned for spray gun applicationSuitable for properly prepared steel, GRP, fibreglass and woodCan be applied to sound, sanded existing paintworkSandable after approximately 2–3 hours at 20°CApproximately 30-minute pot life at 20°CSuitable for professional automotive refinishing2 × 1L kits with hardener includedTECHNICAL SPECIFICATIONSSpecification DetailsBrand MIPAProduct P60 SProduct Type 2K Polyester Spray FillerColour GreyQuantity 2 × 1L KitsTotal Filler Volume 2 LitresHardener MIPA Härter PSMixing Ratio by Weight 30:1Mixing Ratio by Volume 100:5Pot Life at 20°C Approx. 30 MinutesOptional Thinner 0–5% MIPA PE-VerdünnungApplication Spray GunSpray Passes 2–5Dry Film Thickness 150–300µmMaximum Film Thickness 1000µmApproximate Coverage 4–6m² per LitreAir Drying at 20°C Approx. 2–3 HoursHeated Drying at 60°C Approx. 30 MinutesInfrared Drying Approx. 10–15 MinutesSUITABLE SURFACESMIPA P60 S is suitable for application to correctly prepared:Steel car body panelsGRP and fibreglassWoodSound, sanded existing paintworkAll surfaces must be clean, dry and free from grease, dust, rust and other contaminants before application.MIXING & APPLICATIONMixing Ratio by Weight: 30 parts MIPA P60 S to 1 part MIPA Härter PS.Mixing Ratio by Volume: 100 parts MIPA P60 S to 5 parts MIPA Härter PS.Mix thoroughly before use.Pot Life: Approximately 30 minutes at 20°C.If required, the mixture may be thinned with 0–5% MIPA PE-Verdünnung in accordance with the manufacturer's instructions.Apply using suitable spray equipment in approximately 2–5 spray passes, observing the recommended film thickness and drying intervals.DRYING & SANDING TIMESAt 20°C: Approximately 2–3 hoursAt 60°C: Approximately 30 minutesInfrared Drying: Approximately 10–15 minutesDrying times may vary depending on temperature, film thickness and application conditions.Once fully cured, the surface can be sanded and prepared for further automotive refinishing.IDEAL FORCar body repairsAutomotive panel preparationFilling deep sanding marksLevelling uneven surfacesVehicle restorationBodyshop refinishingGRP and fibreglass repair preparationProfessional automotive workshopsPACKAGE CONTENTSYou Will Receive:2 × MIPA P60 S 2K Polyester Spray Filler Grey – 1L Each2 × MIPA Härter PS Hardener Packs – One Per KitTotal Spray Filler: 2 Litres + HardenerSpray gun, thinner and other accessories are not included.IMPORTANT INFORMATIONThis is a professional two-component polyester product.Hardener must be mixed with the filler before application.Always follow the manufacturer's technical data sheet and safety instructions.Use suitable protective gloves, eye protection and appropriate respiratory protection.Ensure adequate ventilation during mixing, application and sanding.Keep away from heat, sparks and ignition sources.Store and dispose of the product according to the manufacturer's instructions.MIPA P60 S 2K POLYESTER SPRAY FILLER – PROFESSIONAL HIGH-BUILD FILLING PERFORMANCE FOR CAR BODY REPAIR.BUY 2 × 1L GREY KITS WITH HARDENER – IDEAL FOR BODYSHOPS, CAR REPAIRS AND VEHICLE RESTORATION.