Final Systems Ultimate UV Primer Grey 750ml X2 High Build Filler + Gloves

2x Final Systems Ultimate UV Primer 750ml AP9019/750 Grey High Build Filler + GlovesPROFESSIONAL 1K UV-CURING ACRYLIC FILLER PRIMER | GREY | HIGH BUILD | FAST CURING | READY TO USE | GLOVES INCLUDEDPRODUCT DESCRIPTIONFinal Systems ULTIMATE UV Primer is a professional-quality, one-component (1K) UV acrylic filler primer developed for fast automotive refinishing, bodywork preparation and vehicle repair applications.Featuring advanced UV-curing technology, this high-build primer is designed to reduce repair times while providing excellent adhesion, filling properties and sandability.Its Grey semi-matt finish makes it suitable for preparing automotive panels before subsequent refinishing stages.When used with a suitable UV-A LED curing lamp under the manufacturer's recommended conditions, the primer can cure in approximately 3 minutes, helping improve efficiency in professional bodyshops and SMART repair workshops.The ready-to-use formulation requires no additional hardener or thinner, making preparation straightforward and convenient.Final Systems ULTIMATE UV Primer offers excellent adhesion to properly prepared metal surfaces, including steel, aluminium and galvanised steel. It can also be used on suitable existing paintwork and correctly prepared plastics when an appropriate plastic primer is applied beforehand.This listing includes 2 × 750ml Final Systems ULTIMATE UV Primer Grey containers plus gloves, providing a total of 1.5 litres of primer.Ideal for professional automotive bodyshops, vehicle restoration specialists, paint preparation workshops and rapid repair applications.KEY FEATURES & BENEFITSProfessional 1K UV acrylic filler primerHigh-build filling formulationGrey semi-matt finishRapid UV-curing technologyApproximately 3-minute curing time under recommended conditionsSuitable for compatible UV-A LED curing lampsReady to use straight from the containerNo hardener requiredNo thinner requiredExcellent adhesion to prepared metal surfacesExcellent sandability after curingCorrosion-resistant formulationSuitable for properly prepared steelSuitable for aluminiumSuitable for galvanised steelSuitable for solvent-resistant existing paintworkSuitable for prepared plastics with an appropriate plastic primerDesigned for professional automotive refinishingSuitable for HVLP spray-gun applicationRecommended spray-gun fluid tip: 1.1–1.3mmRecommended spray pressure: 1 barIdeal for rapid automotive body repairs2 × 750ml containers – 1.5L totalProtective gloves includedTECHNICAL SPECIFICATIONSSpecification DetailsBrand Final SystemsProduct ULTIMATE UV PrimerProduct Code AP9019/750Product Type 1K UV Acrylic Filler PrimerColour GreyFinish Semi-MattQuantity 2 × 750mlTotal Primer Volume 1.5 LitresFormulation Ready to UseHardener Required NoThinner Required NoCuring Method UV-A LED LampApproximate UV Cure Time 3 MinutesApplication Method HVLP Gravity-Feed Spray GunRecommended Fluid Tip 1.1–1.3mmRecommended Spray Pressure 1 BarSandability ExcellentMetal Adhesion ExcellentIntended Use Automotive Body Repair & RefinishingTechnical values are based on the supplied product information. Always refer to the current manufacturer's technical data sheet for full application and curing requirements.SUITABLE SURFACESFinal Systems ULTIMATE UV Primer is suitable for application to correctly prepared:SteelAluminiumGalvanised steelSolvent-resistant existing paintworkSuitable plastics with an appropriate plastic primerAll surfaces must be clean, dry and free from grease, silicone, dust, corrosion and other contaminants before application.For plastic surfaces, apply the appropriate plastic adhesion primer before using ULTIMATE UV Primer.FAST UV CURING TECHNOLOGYFinal Systems ULTIMATE UV Primer is designed to cure rapidly when exposed to a suitable UV-A LED curing lamp.Approximate Curing Time: 3 MinutesThis rapid curing process helps reduce waiting time between primer application and sanding, making the product particularly useful for:SMART repairsSpot repairsAutomotive panel repairsProfessional bodyshop refinishingFast-turnaround vehicle repairsImportant: The stated curing time applies only under the manufacturer's recommended conditions. Actual curing performance depends on lamp compatibility, UV output, distance, exposure time and applied film thickness.A suitable UV curing lamp is required and is not included in this listing.READY-TO-USE FORMULATIONULTIMATE UV Primer is supplied ready for application.No hardener requiredNo thinner requiredNo mixing ratio necessaryPrepare the substrate and use the primer in accordance with the manufacturer's instructions.The ready-to-use formulation helps simplify preparation and reduce material mixing errors.SPRAY APPLICATIONFor professional spray application, the supplied product information recommends:Spray Gun: HVLP Gravity-Feed Spray GunFluid Tip Size: 1.1–1.3mmSpray Pressure: Approximately 1 barGeneral Application GuidelinesThoroughly clean and prepare the repair area.Ensure the surface is dry and free from contamination.Apply a suitable plastic primer first when working on approved plastic substrates.Prepare the spray gun using the recommended settings.Apply ULTIMATE UV Primer according to the manufacturer's instructions.Cure using a suitable UV-A LED lamp for the specified exposure time.Confirm complete curing before sanding.Sand and prepare the surface for compatible subsequent coatings.Always follow the manufacturer's technical data sheet for application thickness, number of coats, curing conditions and overcoating instructions.EXCELLENT SANDABILITY & SURFACE PREPARATIONOnce properly UV-cured, Final Systems ULTIMATE UV Primer provides a sandable surface suitable for further automotive refinishing.Its filling and levelling properties help prepare repaired body panels for subsequent primer and paint applications.The product is particularly useful where fast curing and efficient surface preparation are important.IDEAL APPLICATIONSProfessional automotive refinishingCar body repairsSMART repair applicationsSpot and localised panel repairsVehicle restorationSurface levelling and preparationHigh-build filler primingAutomotive paint preparationSteel and aluminium panel repairsGalvanised steel refinishingProfessional bodyshop workshopsPACKAGE CONTENTSYOU WILL RECEIVE:2 × Final Systems ULTIMATE UV Primer Grey – 750ml EachProduct Code: AP9019/750Protective GlovesTOTAL PRIMER QUANTITY: 1.5 LITRESNOT INCLUDEDUV-A LED Curing LampSpray GunAbrasivesPlastic Adhesion PrimerAdditional Workshop AccessoriesNo hardener or thinner is required for this product.IMPORTANT SAFETY INFORMATIONIntended for professional automotive refinishing applications.Read the manufacturer's technical data sheet and safety data sheet before use.Use suitable protective gloves, safety glasses and protective clothing.Ensure adequate ventilation and suitable extraction during spraying.Use respiratory protection appropriate to the spraying process.Avoid inhaling spray mist and sanding dust.Protect skin and eyes from UV exposure during curing.Use suitable UV-rated eye and skin protection as specified by the curing lamp manufacturer.Follow all applicable workshop safety procedures.Store and dispose of the product according to the manufacturer's instructions.The included gloves do not replace other required personal protective equipment.WHY CHOOSE FINAL SYSTEMS ULTIMATE UV PRIMER?Final Systems ULTIMATE UV Primer combines rapid UV curing, excellent metal adhesion and high-build filling performance in a convenient ready-to-use formulation.With no hardener or thinner required, approximately 3-minute curing under suitable conditions and excellent sandability, it is a practical choice for professional automotive bodyshops and rapid repair applications.2 × 750ML FINAL SYSTEMS ULTIMATE UV PRIMER GREY + GLOVES1.5 LITRES TOTAL | FAST UV CURING | HIGH BUILD | PROFESSIONAL AUTOMOTIVE REFINISHING